Lamella Eliminator Type TAV (Plastic)

The drops, created by distribution of liquids don´t have to be carries out together with the gas flow. Demister and aerosol collection systems have a wide range of applications, i.e. in order to keep material consumption as low as possible, to protect following processes against harmful media or for pollution control reasons.         

  

Application

For horizontal installation and at high separation.

 

Versions

The lamella separators are made of packages with S-shaped profiles. Its surface is specially structured and provided with cardboard strips. Number and pitch of the individual profiles in a profile package can be varied depending on the requirement profile. 

Combined with our demister DA higher separation can be achieved.

 

Function

The flowing gas is forced through the profiles to a flow diversion. This can´t follow the drops due its inertia. They bounce off the surface profile and form a flowing down liquid film.

Data sheet

Data sheet

Description

 

Size	Air volume		DN	L	Ø A	L1	H	H1	B	d1	d2
	from m³ / h	to m³ / h	mm	mm	mm	mm	mm	mm	mm	mm	mm
01	200	400	100	1.200	160	770	360	230	260	1 x DN25	15
02	300	600	125	1.200	200	770	400	250	300	1 x DN25	15
03	550	950	150	1.200	250	770	450	275	350	1 x DN25	15
04	850	1.750	200	1.200	315	770	515	310	415	1 x DN25	15
05	1.350	2.600	250	1.400	395	770	595	350	495	1 x DN40	20
06	1.700	3.350	300	1.400	500	770	700	400	600	1 x DN40	20
07	2.100	4.200	350	1.400	565	790	765	435	665	1 x DN40	20
08	2.700	5.400	400	1.400	630	790	830	465	730	1 x DN25	20
09	3.400	6.700	450	1.400	710	790	910	505	810	1 x DN50	20
10	4.800	9.500	500	1.500	790	790	990

 

 

 

Pressure

Pressure loss With a flow rate of 9 m/s in the pipe max. 200 Pa (applies to water / air at 20°C without wire mesh )

Temperature

Standard

PP	0°C	bis	100°C
PE	-20°C	bis	60°C
PVC	0°C	bis	60°C
PVDF	-20°C	bis	120°C