Produkte/Products
Distributor Trays Typ SBV (Plastic)
Description
Preferably for small column up to 1200mm. Through a dense hole pattern, a large number of drip points are reached.
Versions
Optional the incoming liquid can be calmed with a integrable predistributor in advance.
Function
The liquid is fed centrally with an inlet pipe to the distributor plate. Through existing bottom holes the liquid runs even with changing flow rate constantly.
Data sheet
Type
SBVMaterial
PP,PE, PVC, PVC-C, PVDF, ECTFEDescription
 |
 |
From DN 500 a two piece design is possible.
leakages: ca 100 Stück / m²
control range: ca. 50 % - 120 % rated load
| Di Column ø [mm] | D [mm] | D1 [mm] | B [mm] | C [mm] | Amount of liquid [m³/h] |
| 400 – 620 | 330 | 390 | 70 | 15 | 3 |
| 620 - 790 | 500 | 610 | 70 | 15 | 7,5 |
| 790 - 1.000 | 670 | 780 | 70 | 25 | 15 |
| 960 - 1.190 | 840 | 950 | 120 | 25 | 25 |
Temperature
Standard
| PP | 0°C | bis | 100°C |
| PE | -20°C | bis | 60°C |
| PVC | 0°C | bis | 60°C |
| PVC-C | -20°C | bis | 80°C |
| PVDF | -20°C | bis | 120°C |
| ECTFE | -20°C | bis | 150°C |