Produkte/Products
Spray- or Pipe Distributor Typ SPV/ ROV (Plastic)
Can be used for constant liquid rates for all column sizes and sections.
Versions
The dimensioning of the nozzles, or quantity and kind of borings of the distribution pipes will be adjust to the liquid rate and the column section.
Function
The liquid is sprayed, resp. distributed by means of nozzles and borings, placed evenly on the column surface.
Data sheet
Type
SPV/ROVMaterial
PP,PE, PVC, PVC-C, PVDF, ECTFEDescription
leakages: ca. 100 Stück / m²
amount of liquid: 4 - 100 m³ / m², h
control range: ca 80 % - 120 % rated load
| Di Column ø [mm] | D [mm] | Support width [mm] | Number of distributor pipe | Number of main pipe |
| 850 - 950 | DI - 30 | ca. 50 | 2 | 1 |
| 950 - 1.350 | 3 | 1 | ||
| 1.350 - 1.650 | 4 | 1 | ||
| 1.650 - 2.050 | 5 | 1 | ||
| 2.050 - 2.250 | DI - 50 | ca. 70 | 6 | 1 |
| 2.250 - 2.550 | 7 | 1 | ||
| 2.550 - 2.900 | 8 | 1 / 2 | ||
| 2.900 - 3.250 | 9 | 1 / 2 | ||
| 3.250 - 3.670 | 10 | 1 / 2 | ||
| 3.670 - 3.850 | DI - 70 | ca. 90 | 11 | 1 / 2 |
| 3.850 - 4.150 | 12 | 1 / 2 | ||
| 4.150 - 4.500 | 13 | 1 / 2 |
Temperature
Standard
| PP | 0°C | bis | 100°C |
| PE | -20°C | bis | 60°C |
| PVC | 0°C | bis | 60°C |
| PVC-C | -20°C | bis | 80°C |
| PVDF | -20°C | bis | 120°C |
| ECTFE | -20°C | bis | 150°C |